The use of waste incinerators has some advantages over traditional treatment

The waste incinerator operated in poor conditions and the operation was quickly stopped. In order to solve the problem of poor quality of garbage and difficulty of incineration, a double-layer grate (the lower grate burns strongly) was first adopted, and then in 1884 a garbage-coal mixture was used to improve the combustion characteristics of coal. Fuel ignition, but no satisfactory results were obtained, chimney low, the surrounding environment was polluted by irritating flue gases, garbage incineration is suitable for household waste, medical waste, general industrial waste (general industrial waste adopts high temperature combustion, secondary oxygen), automatic slag discharge, etc.). discharge of high-tech measures to meet the requirements of effluent discharge monitoring).
Compared to landfill and composting, waste incineration can save more land and will not pollute surface and groundwater. With the acceleration of urbanization and the recent limitation of construction land index, waste incineration in large and medium-sized cities has gradually become a densely populated city. A realistic choice with high land utilization rate and high degree of urbanization.
A garbage incinerator is a waste incineration treatment device. The garbage is burned in the furnace and the exhaust gases enter the secondary combustion chamber. It burns completely under the forced combustion of the burner and then enters the spray dust collector. After dusting, the garbage is discharged into the atmosphere through the chimney. The waste incinerator consists of four systems: a waste pretreatment system, an incineration system, a flue gas biochemical dust removal system and a gas generator (auxiliary ignition and incineration). It integrates automatic feeding, screening, drying, incineration, ash removal, dust removal and automatic control.
Garbage incinerator is a kind of harmless treatment equipment commonly used for medical, domestic waste and animal harmless treatment. The principle is to burn and carbonize high-temperature treated objects by burning coal, fuel oil and gas. Achieve the purpose of disinfection.
To solve the problem of smoke and carbon black pollution, one step is to increase the incineration temperature to 700 degrees Celsius and further increase it to 800-1100 degrees Celsius. At that time, the influence of the amount of combustion air and the input method on the flue gas temperature was already known. Therefore, measures such as increasing the temperature of the chimney are taken. NEY adopts the configuration of blower and induced draft fan, which increases the ventilation volume and meets the requirements of the amount of combustion air during the incineration process. It also solves the problem of the diffusion of irritating harmful substances in the smoke when the chimney is raised.
Since the type and composition of waste can vary greatly depending on the region and season, waste incineration equipment must have good fuel adaptability. Therefore, the technical measures taken at that time were to increase the waste drying area in the incinerator. It is preheated with combustion air.